Masterbricks

Masterbricks feauture an authentic antique texture in unique colors and they are suitable for interior and exterior use. Masterbricks also includes corner bricks for a perfect fit on every surface. Nature is our inspiration. Quality, Aesthetics and Durability are our trademarks.

Masterbrick White

Masterbrick White

108153

Masterbrick Keramos

Masterbrick Keramos

105957

Masterbrick Amber

Masterbrick Amber

105956

Masterbrick Red Tarnished

Masterbrick Red Tarnished

106061

Masterbrick Khaki

Masterbrick Khaki

106057

Masterbrick Dusk

Masterbrick Dusk

106059

Masterbrick Dark Red

Masterbrick Dark Red

106063

Masterbrick Copper

Masterbrick Copper

108160

Masterbrick Black

Masterbrick Black

108779

Masterbrick White Grained

Masterbrick White Grained

108216

Flat Corner
6.3cm 6.3cm
23cm 12-23cm
0.8-1cm 0.8-1cm
18kg* 11kg*
0.93m²* 2m*
*pro Carton

Masterbrick Corners

Get Inspired

Masterbrick Khaki

Masterbrick Khaki

Masterbrick Dark Red

Masterbrick Dark Red

Masterbrick Dark Red

Masterbrick Dark Red

Masterbrick Foggy

Masterbrick Foggy

Complementary Products

Watch our guide below for successful installation

Before installation – Preparing the surface

We clean the substrate from dust, dirt, for good accretion of the mortar-shapes, thickness and textures. Level out the first line of where the stones will be placed.
If we work on a absorbent substrate like gypsum board or wood, we have to apply primer to reduce the absorbency

Installation with joint

Provided that there is a joint, in order to stabilise the stones small spacers can be used where it is needed

Grout

For the installation use a pastry bag or a grouting gun. In both cases effectively cut the end until the desirable width for the joint is achieved.
Lay the mortar with a spatula or special tool
Clean the stones by using a dry paint brush.
If mortars gets on the surface of the stone before it hardens (after ó or 1  hour) brush off the mortar with a soft wired brushed or hard plastic, do not use metal.

Tips for successful installation

In case the stone surface dirties from the mortar it is recommended to clean it with a soft wire brush, a litttle before the mortar “hardens”.Do not try to clean when mortar is fresh and do not use metal.
Add mortar taking into consideration the amount of water for good accretion and the right consistency.
If the installation includes corners then begin from the corner of the wall & continue the installation in line with the flat elements.
When installing the joint the creation of vertical joints in parallel lines must be avoided
If empty gaps are large, fill them with stones by cutting them to the size needed. 
Lay out stones and mix from various cartons at least 2m² to create a ballance between different colours, shapes, thickness and textures

Warranty

All of our stone veneers come with a 30 year warranty.